| Element |
Description |
| User name |
Specify the user name that you want to use for connecting to the OSD share on the server. |
| Password |
Specify the password that you want to be used to validate against the server. |
| Startup password |
Specify this value to force a password at the start of WINPE boot sequence. |
| No startup password on reinstall |
Specify if startup password should be on reinstall |
| Show hardware information error |
specify weather to show hardware information errors or not |
| Disable command prompt |
Set this to True to prevent users from opening a command prompt using CTRL+F10 during the OSDLOADER process. |
| Run command prompt on error |
Specify if you want a command prompt to be displayed if OSD Loader is unable to locate and launch OSD GUI. |
| Maximum network retries |
Specify the number of retries OSD will do to connect to the OSD share, increase this number to remediate issues with network timeouts during OSD startup. |
| No startup password on reinstall |
If a startup password is specified it will be required for reinstallations also, unless this option is enabled. |
| Translate servername to IP address |
Disable this option to prevent OSD from converting the servername supplied for reinstallation, to an IP address. |
| Show hardware information on error |
Allow users to browse hardware information if OSD is unable to startup correctly, this is very useful when troubleshooting network driver issues. |
